In-Frame Overhaul Rebuild Kit | Cummins N14 E | High Performance

$2,675.00

In-Frame Overhaul Rebuild Kit | Cummins N14 E Celect Plus | High Performance

  • 6 x Cylinder Kits (Liner, Piston, Ring-Set, Pin & Retainers) & Liner O-Rings (Ceramic Coated)
  • 1 x Main Bearing Set (Ceramic Coated)
  • 12 x Rod Bearing Shells (Ceramic Coated)
  • 1 x Upper Gasket Set
  • 1 x Injector O-rings Kit
  • 1 x Oil Pan Gasket

Add Cam Shaft Bushing Kit

Add Piston Cooling Nozzle (x6)

Add Thermostats

Add Lower Gasket Set

Engine Serial # | Vin # | Additional Comments

Leave us your info so we can make sure to properly identify and ship the correct set of parts.

Description

In-Frame Overhaul Rebuild Kit | Cummins N14 E | High Performance Ceramic Coated Parts

In-Frame Overhaul Rebuild Kit | Cummins N14 E Celect Plus | High Performance

Kit Contents:

  • (12) Connecting Rod Bearings
  • (1) Main Bearing Set
  • (6) Cylinder Kit
    • (6) Cylinder Liners
    • (6) Piston Pins
    • (6) Liner Seal Kit
      • (6) Liner Crevice Seals
      • (12) Liner Seals
      • (12) Retaining Rings
    • (6) Piston Crowns
    • (6) Piston Ring Set
    • (6) Piston Skirts
  • (1) Oil Pan Installation Kit
  • (1) Upper Engine Gasket Set
    • (1) Turbo Oil Inlet O-Ring Seal
    • (3) Rocker Lever Cover Gaskets
    • (1) Rectangular Ring Seal
    • (1) Gasket
    • (1) Ring Seal
    • (1) Thermostat Housing Gasket
    • (3) Exhaust Manifold Gaskets
    • (1) Thermostat Housing Gasket
    • (3) Cylinder Head Gaskets
    • (3) Rocker Lever Housing Gaskets
    • (3) Water Bypass O-Ring Seals
    • (6) Injector Top O-Ring Seals
    • (6) Injector Mid O-Ring Seals
    • (6) Injector Bottom O-Ring Seals
    • (1) Cap screw Gauge
    • (12) Fuel Crossover O-Ring Seals
    • (1) Turbo Oil Drain Gasket
    • (3) Manifold Gaskets
    • (6) Gaskets
    • (6) O-Ring Seals
    • (1) Thermostat Housing Gasket

Additional information

Weight 250 lbs
Dimensions 48 × 48 × 18 in

OEM Interchange

Furnished Upon Request

Technical Data

94N14 & Up 6 Exhaust Gaskets

N14:
Year: 1991-2006
Liter: 14.0
CID: 855
Cyl: L 6
Bore/Stroke:5.4998-5.5050″,6.0000″
Compression Ratio: 16.3:1 RATIO
Firing Order:1-5-3-6-2-4

N14:
Year: 1991-2000
WITH O.S. LINER
*Shares same engine/ tune-up specifications

Tune-Up Specifications:
Oil Pressure At Idle: 10 PSI @ 700RPM
Oil Pressure: 35-45 PSI
Intake Valve Lash: .014″ COLD
Exhaust Valve Lash: .027″ COLD

You may also like…